Resultados de búsqueda - S*

Gestión de riesgos ambientales para conservar la salud/ Gustavo Pedraza Poveda por Pedraza Poveda, Gustavo

Tabla de Contenidos: “…Mecanismos y metodología para controlar la contaminación del agua y los riesgos a la salud -- Capítulo 2. Riesgos a la salud ambiental causados por contaminantes del medio -- Los trayectos ambientales de exposición a contaminantes del medio -- Evaluación de riesgos ambientales -- Capítulo 5. …”

Psicología de la selección de personal por Chamorro-Premuzic, Tomás

Tabla de Contenidos: “…Métodos de selección de personal -- Primeros métodos no cientificos -- La entrevista -- Las cartas de recomendación -- Los datos biográficos -- Las pruebas situacionales y las calificaciones académicas -- Los constructos psicológicos en la selección de personal -- La inteligencia general -- Los rasgos de personalidad -- La creatividad -- El liderazgo -- El talento -- Biografía.…”

Structural depth reference manual for the civil pe exam por Williams, Alan

Tabla de Contenidos: “…Preface and acknowledgments -- Introduction -- References and codes -- Uses to prepare this book -- Reinforced concrete disign -- Founations -- Prestressed concrete design -- Structural steel design -- Design of wood structures -- Design of reinforced masonry -- Index -- Index of codes.…”

Innovation and technologies in construction: Selected papers of buildintech bit 2022 por Vasil'yevich Klyuev, Sergey

Tabla de Contenidos: “…High-efficiency wall materal based on technogenic aluminosilicate rawmaterials -- modernization ofthe mill's working bodies for the production of fine building materials -- Using of citrogypsum in alkali activated systems -- Efficiency if stabilization of sandy, coarse-grained and technologenic soils with polymer complexes and surfactants of structural layers of highways -- Investigation of gas release processes in a polymer composite filled with amorphous boron under thermal and radiation exposure -- Obtaining energy efficiente polymer-birumen binders using polymer-bitumen binders using polymer-bitumen concentrate -- Effect of cyclic loading level on elastic-strength characteristics and kinetics of damage accumulation in polymers -- Research methods for flame retardant and constructuon and technological properties of protective cnstruction and technological properties of protective coatings -- Methodology for the selectión of optimal parameters of the finite element mesh in compsite materials calculation -- Review study of recycled aggregate concrete coumn under eccentric loading -- Surface modification of ZrH2 with an organosilicon oligmer -- Formation of copper coating on the surface of titanium hydride using quadruple magnetron sputtering -- Investigating of the residual stresses during the extraction of a polymer product from an extruder -- Compatibility of polymer and plsticizer-as a key factor in the formation of degradation-resistant bituminous binder -- Improving the method of assessing the bearing capacity of complex technical systemms -- Optimization o foam fiber concrete mix desing by mathematical modeling -- Analysis of intermdiates produced during the synthesis of Alkyd resins -- Surface structure of modified titanium hydride fraction -- Optimization of paramenters for the production of gypsum binders based on gypsum-containing waste -- Heat-shielding properties of concrete structures reinforced with composite reinforcement -- Eosive wear of alumina coated plyimide composite -- Biological and climatic resistance of cement composites based on biocidal binders -- calculation of the parameters of the grinding load in a ball-tube mill for the production of construction materials -- Dynamic behavior of an "earth dam-foundation" plane system within wave theory -- Effect of plasma blast furnace slag treatment on properties of blast furnace slag-cement mortar -- Mechanical, tribological, and anticorrosion properties of the coating produced by magnetron sputtering of a Ni-Cr-B4C compsite target -- Corretation of bitumen emulsion stability factor with aqueous phase parameters evaluated at the stage of composition design -- Electrochemical co-depsition of copper and nanodispersed tungsten carbide on titanium hydride -- Light-colored ceramic products from red-burning clay raw materials -- On the effect of operating conditions on the coupling of non-metallic external reinforcement with reinforced concrete structure -- Research study of mixing processes in the pneumatic mixer for dry construction mixes -- Improving the calculation of variable cross section compressed wooden bars stability -- Characterization of a polymer composite withs a hybrid filler -- Finite element modling of the work of bent reinforced concrete elements of rectangular section in the abaqus software environment -- Clay-slag autoclaved composite material with the usage of activated aluminosilicate raw materials -- cellular concrete mixes with bentonite suspension -- Foundation type influence on the construction site seismicity -- model of the catastrophic stage of wood damage accumulation under uniaxial compression -- Improving the opertional reliability of complex technical systems operting in corrosive conditions -- Power calculation of ball-tube mill drives in the construction materials industry -- Calculation of reliability of beam with corrugated wall with limited information about the controlled parameters at the stage of operation -- White cement clinker roasting intensification -- The influence of electric current on the water separation of cements -- Analysis of the effect of cyclic loading mode on the change in the properties of polymer materials -- Mofification of properties and study of electrical conductivity of citrogypsum -- Improving the quality of building materials due to the effect of shear deformation on the parameters of the grinding process -- Water-resistant clay and slag coposite material of autoclaved hadening -- The study of the patterns of soil contact with a solid suface -- Stress-strain state simulation for the eccentrically compressed reinforced concrete columns with local prestress at the manufacturing stage -- Filled plyurethane foam with improved qulity indicarors -- Autror index.…”

Suministro distribución y evaluación interior de agua sanitaria por Soriano Rull, Albert

Tabla de Contenidos: “…Hidráulica de las conducciones -- Físico-química del agua -- Tratamientos domésticos y terciarios del agua -- Instalaciones de suministro y distribución de agua sanitaria -- Aparatos sanitarios y griferías -- Cálculo de las instalaciones de agua fría -- Instalaciones para un consumo sostenible. …”

100 edificios del siglo XX por Warke, Val

Tabla de Contenidos: “…Prólogo, Thom Mayne - 100 edificios - Tablas de edificios y arquitectos - Selección de los arquitectos Bibliografía Agradecimiento Créditos fotográficos…”

Novel Precast Concrete Structure Systems por Wu, Gang

Tabla de Contenidos: “…Introducctio -- Ductile precast concrete frame with dry-connections -- Prestressed precast concrete frame with external dissipaters -- Friction damped self-centering precast concrete frame -- Cast-in-place frame-pregabricaaated sub-frame system -- Prefabricated rocking wall structural system -- Prefabricated concrete cassette structure --Modularized suspended building structure -- Appendix: categorization of mega-substructure systems -- References.…”

Sesimic isolation, energy dissipation and active vibration control of structures por Cimellaro, Gian Paolo

Tabla de Contenidos: “…Latest aplications on seismic isolation in different countries -- Applications and recent studies on seismic isolation in Italy -- State of the art in application of seismic isolation and energy dissipation in Turkey -- Seismic isolation applications in Romania -- Efforts toward international harmonization of seismic isolation design code and current status in Japan -- Recent development and application on seismic isolation, energy dissiátion and vibration control in China --Recent developments and applications of seismic isolation in North America -- Seismic isolation in Chile: an opportunity for model codes calibration -- Optimization as a tool for seismic protection of structures --Near-fault earthquike ground motion and seismic isolation design -- Origin of seismicity in Italy as a clue for seismic Hazard -- New isolation and energy dissipation devices -- Seismic isolation design for achieving resilient structures -- Mechanical properties of thick rubber bearings used in over-track buildings -- Bidirectional model for shear behavior of high damping Rubber Bearings -- Development of an improved deformation history integral type hysteresis model for high-damping Rubber Bearings --Application of isolation in large scale infrastructure in cold region in China -- Experimental and analytical investigation of variable curvature and friction pendulum isolator -- Experimental investigarion on hysteretic behavior of a double friction pendulum and frictional hearing -- An experimental study on the effects of different pendulum damper designs on structural behavior --Effect of over-stroke capacity of curved surface sliders on the collapse safety of seimically isolated buildings --Cresent shaped brace devices to strengrhen pinned beam-column connections vía semi-rigid CSB joints -- Reability based design optimization of damped-outrigger timber structure using stochstic spectral embedding based probability density evolution method -- Research on the three-dimension seismic isolation system for lightweight buildings -- Numerical assessment of ultra-low cycle fatigue performance of buckling restrained aluminum shear yielding dampers -- Validation of a new equation to estimate the yield strength of lead rubber bearings -- International standards on seismically isolated structures -- Seismic isolation design comparison of Japan, China, USA an Eurocode -- Statical analysis of rubber compunds material tests for seismic isolation bearings and code provisions comparison -- Code provision about λ-factors of HDRBs for the upper and lower bound analyses: hystorical review -- Design of base-isolated building as Per Indian code provisions and practices -- Complex modal shapes superposition response spectrum based design method for seismically isolated structures in China -- Hidden pitfalls in double curved surface sliders (DCSS) -- Full scale dynamic tests on concave curved surface sliders: comparison of time history and cyclic sinusoidal tests -- Seismic isolation and energy dissipation in bridges and viaducts seismic isolation of bridges: practice-oriented considerations --Effects of ice and water and contamination on friction pendulum bearings -- Performance assessment of a bridge seismically isolated with lead rubber bearings at low temperature -- Seismic design and performance assessment of the post-tensioned bridge piers -- Seismic performance of isolated bridges under extrem shaking -- The role of an advanced quality system for the control of performance of lead rubber bearings: the case of puente industrial de Biobio --The bridges on canakkale highway: a huge application of the seismic protection technology in Europe -- Fluid viscous dampers for the 1915 canakkale bridge in Turkey -- Seismic Isolation and energy dissipation in high-risk plants, existing and cultural heritage structures --Application of the gradient based optimization to the structural systems with the supplemental deamping devices -- 3-D seismic isolation for operational level protection of critical electrical and electronic control equipament for the site c clean energy project -- A comparative study on isolator modeling approaches -- Seismic base isolation of a strategic historic masonry building -- Multi-storey building retrofit by ADAS-equipped braces -- The effect of nomlinear response of the primary system in nonconventional TMMMDs -- Isolated artificial ground for the seismic sagety in the urban reconstruction of castelluccio di Norcia -- Numerical application of viscoelastic devices for improving the out-of-plane behaviour of a historic masonry building -- Resilience and sustainability: new challenges and future technologies for the protection of structures and infrastructures state-of-the-art of reilience using bibliometric analysis -- Observed seismic behaviour of base isolation systems in Italy -- Versatile aseismic isolation based on practical applications of advanced materials for sustainable resilience against earthquakes -- Seismic isolation of the terminal core roof at the portland intenational airport -- Coupling of structural additions for the mitigation of seismic response in existing buildings -- Verification of actual displacement scaled displacement-control system with high-static-low-dynamic stiffness and rotational inertia for seismic isolation -- Seismic protection of non-structural elements and equipment, statues and art objects -- Improved structural serviceability and seismic protection by adaptive isolators and dampers -- Preliminary results in the design and testing of eathquake-proof glass-aluminium partition walls -- Preliminary results in the design and testing of earthquake-resistant school furniture -- Experimental seismic response characterisation of brackets for use in ventilated facade systems -- Shake table tests on a new passively controlled system with pulley amplification mechanisms for suspended ceilings -- Advanced digital video analyses to estimate the dynamic behavior for proper design of a base-isolation system of the sarcophagus of the spouses at the national estruscan museum in Rome: preliminary results -- Seismic protection of the goddess of morgantina statue through an innovative base-isolation device: validation by shake-table tests -- Base- isolation of a rocking object on a rocking pedestal: response to pulse-type ground motion -- Seismic risk mitigation for non-structural components: from experimentation to home automation a shake table testing campaign of electrical cabinets -- Effects of the vertical and horizontal acceleration on the seismic response of piping networks -- Seismic vulnerability of pallet storage systems --A simplified framework to generate fragility functions for in-plane behavior of gypsum partiton walls -- Dunamic characterization of glazed partition walls by operational modal analysis technique -- Dynamic characterization and damage detection of a fire-protection pipig system -- A rapid visual screening procedure to evaluate seismic risk of non-structural elements in critical facilities -- Comparison of seismic losses associated with traditional/innovative hollow brick and plasteboard internal partitions -- Vibration-based test results for the investigarion othe infill masonry wall damage -- Dynamic properties and seismic response of a museum display case with an art object -- Experimental study on ceiling fall prevention using new materials -- Shake-table tests on an industrial steel rack isolated with innovative modular devices -- On the use of CLT infills to improve the lateral performance of RC frames -- Required response spectra and acceleration loading histories for seismic assessment of acceleration-sensitive nonstructural elements according to the Italian building code -- Supplemental energy dessipation devices for passive structural control -- Multi-EDP peformance assessment of a steel BRBF under ground motin sequences -- Modern systems for wind and seismic induce vibrations -- Echancing stiffness and/or damping in structural systems with cellular shear walls -- Development of new optimal passive non-detuning mass dampers -- Challenges and detailing considerations for the incorporation of passive energy dissipatin systems in life science occupancies -- Seismic isolation in the US mission critical sector --The brittle failure of fluid viscous dampers and the related consequences on the reliability of a medium-rise steel building -- Preliminary numerical analysis of the response of vase-isolated SDOF systems constrained by two deformable devices under seismic excitations -- Seismic vulnerability assessment and mitigation of existing buildings seismic retrofit of r.c. buildings with base isolation -- Advanced constitutive laws for nonlinear static analyses of masonry structures -- Seismic response spectra of the 24th august 2016 amatrice earthquake --Assessment of the acceleration floor spectra trhrough dynamic identification: the museum of bargello in florence -- Experimental evaluation of the cyclic behaviour of different smooth rebar anchoring layouts -- Dynamic characterisation and seismic vulnerability assessment of existing masonry port structures -- Horizontal and vertical BIM interoperability aimed at seismic vulnerability assessment -- Automating the frequency domain decomposition technique using the modal assurance criterion.…”

Handbook of: Industrial and systems engineering por Badiru, Adedeji B.

Tabla de Contenidos: “…Project scheduling Chapter 53. Scheduling of production and service systems Chapter 54. …”

Salud laboral : conceptos y técnicas para la prevención de riesgos laborales por Ruiz-Frutos, Carlos, Ruiz-Frutos, Carlos, Delclòs, Jordi Delclòs Clanchet, Ronda, Elena, García, Ana M. 1963-, Benavides, Fernando G.

Tabla de Contenidos: “…Vigilancia de la salud -- Parte II Organización y marco jurídico -- Protección social y aseguramiento de los riesgos laborales -- Salud laboral desde el sistema público de salud -- Participación de los trabajadores -- Buena práctica profesional y códigos éticos en salud laboral -- Parte III Evaluación de riesgos y vigilancia de la salud -- Evaluación de riesgos laborales -- Metodología de las encuestas sobre condiciones de trabajo, empleo y salud -- Lesiones por accidente de trabajo -- Enfermedades de origen laboral -- Incapacidades laborales -- Parte IV Problemas específicos de salud laboral -- Trabajadoras domésticas -- Inmigración y salud laboral -- Precariedad, informalidad y salud -- Trabajo y salud mental -- Cáncer laboral y cáncer profesional -- Trabajo en la agricultura y salud -- Crisis sanitaria y salud laboral: el caso de la COVID-19 -- Bienestar y salud en el trabajo del futuro -- Índice alfabético.…”

Nutrición clínica y salud nutricional por Ortega Anta, Rosa María

Tabla de Contenidos: “…Nutrigenética, epigenética y crononutrición en la mejora nutricional y sanitaria -- Patrón alimentario y microbiota -- Microbiota y obesidad: ¿Somos lo que comemos? …”

Earth and space 2022: Space exploration, utilization, engineering, and construction in extreme environments por Dreyer, Christopher B.

Tabla de Contenidos: “…Granular mechanics of JSC-1 mars regolith simulants -- Mapping lunar lander plume ejecta trjectories to lunar suface elevations -- Geometrical characteristics of lunar and martian regolith simulants -- Experimentally evaluating granular scaling laws for predicting lunar-gravity wheel performance in cohesive regolith -- Uniform dust deposition system for dust tolerance studies -- Demonstration of capability to simulate particle irregular shape and poly-disperse mixtures within lunar lander plume-surface interaction --Aplicability of simulants in developing lunar systems and infrastructure: geotechnical measurements of lunar highlands simulant LHS-1 -- Lunar dust simulants and their applications -- Traction of interlocking spikes on a granular material -- Static and kinetic fricition coefficientes for regolith delivery into a molten regolith electrolysis reactor -- Power measurenments to excabate lunar soil simulant GRC-3B using are backhoe trajectories -- Magnetic and microwave susceptibilities of lunar simulants and their constituents for use in creting building materials via beneficiation -- The specialized penetrometer instrument: SAMPLR and beyond -- Discrete element modeling of drilling process into the lunar regolith simulants of JSC-1A -- RTGradiator efficiency in the presence of lunar dust -- Exploration and utilization of extraterrestrial bodies -- Penetration analysis of high-frequency vibro-based probes in granular media using the discrete element method -- SPARTA-A new geotechnical tool for subsurface exploration -- Analysis of sintered hawaiian baslt building blocks for landing pad use and recommendations for improvement -- Some key explorations in planetary rover autonomy for ISRU roles on the moon -- Discrete element method and multi-body dinamics co-simulation framework for regolith-tool interaction modeling -- Repurposing drilling control diagnostics for subsurface edge detection and boundary advisement during planetary drilling -- Ablative arc mining for in situ reource utilization -- Testing of a bucket ladder excavation mechanism for lunar applications --Rock breaking techniques using high concentrated energy sources for space mining applications -- Method for thermal modeling and volatile measurement of lunar regolith -- Field testing of simulated lunar ice characterization using ground penetrating rada technology -- Leaching of lunar regolith for synthetic phyllosilicates on the moon -- Local Resource utilization of lunar regolith for manufacturing at the point-of-need of metal matrix composites -- NASA science technology development programs for ocean worlds exploration -- A review of extra-terrestrial regolith excabation concepts and prototypes -- Lateal stability of vehicle with interlocking spikes -- Leaching of lunar regolith for synthetic phyllosilicates on the moon -- Local resource utilization of lunar regolith for manufacturing at the point-of-need of metal matrix composites -- NASA science technology development programs for ocean worlds exploration -- A review of extra-terrestrial regolith excavation concepts and prototypes -- Lateral stability of vehicle with interlocking spikes -- Liberation of mineral-bound water of the meridiani planum driven by process heat from carbonylation steel-making and concentrated photovoltaic electricity generation -- Redwater: extraction of water from mars'ice deposits -- Rapid extraction of volatiles from excavated icy regolith using a rotary extraction drum -- Volatile prospecting through thermal properties of subsurface icy regolith -- Site characterization for the redwater ISRU system -- ISRU pilot excavator: bucket drum scaling experimental results -- practical space resource utilization at the hundred megatonne scale: enabling a planetary sunshade to reverse global warming -- SMART: instrumented drill for ISRU investigarions on the moon -- Influence of ice distribution on thermal mining performance and strategies to counter sublimation lag -- Commissioning and testing a new dusty thermal vacuum chamber with inclusion of icy regolith -- Molten regolith electrolysis using concentrated solar heating -- TRIDENT drill for VIPER and PRIME-1 missions to the moon -- Advanced materials and designs for aerospace and terrestrial structures under extreme environments -- A novel partitioned approach for reduced order model-finite element model (ROM-FEM) and ROM-ROM coupling -- Lessons learned and best practices for utilizing a generalized composite impact model -- Modeling and analysis of a nonlinear locally reonant metamatrial with inductance shunat -- Ballistic impact simulations of a titanium 6A1-4V generic fan blade fragment on an aluminum 2024 panel using *MAT_224 in LS-DYNA -- Prediction of fracture location of duplex stainless steel welds -- Study of aircraft structural response and occupant loading during a water sitching event utilizing -- LS-DYNA simulation -- A compact delayed photocurrent model based on a reduced order data-driven exponenctial time integrator -- Turk salty concrete (TSC) can isolate the freshwater interface against the sea water intrusion and salty formantions -- Structurs in challenging environments: Dynamics, controls, smart structures, health monitoring, and sensors -- Risk-based structural optimizaation framework for connected structural system subjected to extreme events -- Viability of construction material within an extraterrestrial environment -- Detection of corrosion-induced damge in bolted steel structure using piezoceramic transducers -- Seismic and resilient property analysis of SMA-Based replaceable BRBs -- Seismic evaluation of lava tubes subjected to moonquakes -- Examination of smart sandbags for semi-permanent structures on the lunar suface -- Automatic reading method for pointer meter based on computer vision -- Identification method for displacement of substation structure based on machine vision -- Space engineering, construction, and archtecture for the moon, mars and beyond -- Applying architectural design and construction principles to lunar and martian construction -- A summary of technical requirements, environmental factors, and loading for lunar infrastructure -- Stone, brick, and concrete masonry on mars -- Structural and durability properties of MgO-AI2SiO3 concrete for ISRU martian construction -- Lunar demandite-You gotta make this using nothing but that -- Is in situ electronics fabrication feasible on the moon? …”

Geotechnical problems and solutions: A practical perspective por Indraratna, Buddhima

Tabla de Contenidos: “…Poulos -- Preface -- About the authors -- Soil properties and calssification -- Weight-volume relations and compaction -- Effective stress concepts -- Permeability and seepage -- Elastic stress and deformation analysis -- Consolidation settlement and analysis -- Shear strength, stress paths and failure -- Critical state soil behavior --Bearing capacity of foundations -- Mass movement and slope stability analysis -- Retaining walls and dams -- Excavations and tunnels -- Pavement infrastructure (roads and rails) -- Unsaturated soil mechanics and applications -- Dewatering, radial drainage and vacuum consolidation -- Index.…”

Salud y enfermedad del niño y del adolescente por Martínez y Martínez, Roberto

Tabla de Contenidos: “…Neonatología Embarazo de riego alto Exploración física del recién nacido Prematurez Enterocolitis necrosante Síndrome de dificultad respiratoria Hiperbilirrubinemia (síndrome ictérico) Sepsis neonatal Encefalopatía hipóxico-isquémica Unidad 2. …”

Salud mental y COVID-19 por Carranza Risco, Ana Sofía

Tabla de Contenidos: “…Abreviaturas, acrónicas y siglas -- Introducción -- Crisis sobre crisis: ciudadanía y salud mental en tiempos de pandemia -- Salud mental en los espacios educativos: desafíos y caminos -- Violencia contra las mujeres y salud mental en el contexto de la COVID-19 -- Salud mental y poblaciones vulnerables frente a la COVID-19: Estrategias comunicatorias de familiares de personas desaparecidas -- La salud y la promoción de la salud en tiempos de pandemia -- Sobre los autores.…”

Contabilidad de sociedad I, Contabilidad de Sociedades II Plan contable geneal empresarial por Palomino Hurtado, Carlos

Tabla de Contenidos: “…Introducción -- Capítulo IV: Sociedad colectiva -- Capítulo V: Sociedad en comandita -- Capítulo VI: Sociedad comercial de responsabilidad limitada -- Capítulo VII: Sociedades civiles -- Capítulo VIII: Administración de las sociedades -- Capítulo IX: Emisión de obligaciones -- Capítulo XII: Reorganización de las sociedades -- Capítulo X: Distribución de utilidades.…”

Terapia ocupacional y promoción de la salud por Souto Gómez, Ana Isabel

Tabla de Contenidos: “…Repercusión práctica -- Estrategias de promoción de la salud -- Promoción de estilos de vida y entornos saludables -- Intervenciones de terapia ocupacional en promoción de la salud -- Solucionario de las preguntas de autoevaluación -- Bibliografía seleccionada.…”

Plan contable general empresarial (PCGE 2020): análisis a nivel de subcuentas: Implicancias financieras y tributarias de su aplicación por Effio Pereda, Fernando

Tabla de Contenidos: “…Elemento 1 -- Capítulo II: Elemento 2 activo realizable -- Capítulo III: Elemento 3 activo inmovilizado -- Capítulo IV: Elemento 4 pasivo -- Capítulo V: Elemento 5 patrimonio -- Capítulo VI: Elemento 6 gastos por naturaleza -- Capítulo VII: Elemento 7 ingresos -- Capítulo VIII: Elemento 8 saldos intermediarios de gestión y determinación del resultado del ejercicio -- Capítulo IX: Elemento 9 contabilidad analítica de explotación: costos de producción y gastos por función -- Elemento o cuentas de orden.…”

Flow y bienestar subjetivo en el trabajo por Rodríguez Sánchez, Alma María, 1980-

Tabla de Contenidos: “…Introducción -- Flow y binestar sujetivo en el trabajo -- Análisis del tema: ¿Qué hace que me sienta como me siento en el trabajo? …”

Valuación de Activos del Estado de Situación Financiera en el Contexto del COVID-19 NIC 1 NIIF 9 NIC 2 NIIF 5 NIC 40 NIIF 16 NIC 16 NIC 38 NIC 41 NIC 12 NIC 36